Exibindo todos 13 resultados

  • High Voltage fiberglass safety insulated Rescue HookFiberglass Insulated Rescue Hook with Foam Filled

    FRP High Voltage Insulation safety electrical Rescue Hook Safety Rod

    An invaluable tool for any workplace used to withdraw an injured worker out of a hazardous area. Confined spaces, in vaults, or just near electrical cabinets and switch gear are some of the places where the Insulated Rescue Hook is a must.

    High Voltage fiberglass safety insulated Rescue Hook is a must have life-saving devices in all of your electrical safety areas. Hook is constructed of high-strength, vinyl-dipped steel and has a 18″W opening (or as per your requires). Handle is made from non-conductive fiberglass. 100% electrically proof tested and meets ASTM F711 standard specifications.

    The insulated fiberglass shaft has an 18”(or customize)yellow coated, heat-treated steel hook on one end and a rubber end cap on the other end. The innovative design allows for the unit to ship as two separate components, resulting in substantial shipping savings for the user without sacrificing strength or toughness as an assembled product.

    All Utility Solutions fiberglass is manufactured from the highest quality electrical grade fiberglass. Wall thickness has been engineered to provide the utmost in mechanical strength to meet the rigors of in field pushing, pulling or twisting of stubborn equipment.

    Featuring a foam filled, fiberglass reinforced handle for superior electrical insulation and a coated heat treated body hook with an 18” yellow coated, heat-treated steel hook on one end and a rubber end cap on the other end. This combination produces a tool of the highest quality, durability, and reliability, setting a new industry standard. manufactured from the highest quality electrical grade fiberglass. Wall thickness has been engineered to provide the utmost in mechanical strength to meet the rigors of in field pushing, pulling or twisting of stubborn equipment.

    Each stick interior is filled with a high-performance closed cell foam to prevent water ingress. High Voltage fiberglass safety insulated Rescue Hook exterior has been chemically sealed to provide a smooth surface texture for easy cleaning. Utility Solutions straight sticks meet or exceed all applicable industry performance criteria including ASTM F711, ASTM F1826 and OSHA Sub. V sec. 1969.951(d).

  • FRP Portable high branch shear saw sets

    FRP Portable high branch shear saw sets

    FRP Portable high branch shear saw sets

    The tree pruners adopt advanced technology and process at home and abroad to produce and effectively use the mechanical principle. The new insulating high branch shear is applicable to the cleaning of branches and trunks under power lines. The insulating rod is made of special thickened insulating rod and reinforced. The available reducer interface is insulating rod. The rod length and thickness can be customized according to user requirements. It can be specially made with telescopic rod, and connected with buckle or pin type and ball connection.

  • FRP Triangle Telescopic Operating RodHigh-Voltage-Adjustable-FRP-Triangle-Telescopic-Operating-Rod-Hot-Stick-with-Operating-Rod

    FRP Triangle Telescopic Hot Stick with Operating Rod

    The triangular shaped Telescopic Operating Rod are designed to be used in high voltage isolating switch out operating, being one of the most used tools in hot line maintenance. The Telescopic hot sticks are manufactured with epoxy reinforced fiberglass tubes. It comprises a number of sticks that slide into each other with integrated locking buttons. They have a lot of advantages over round hot stick. a. Easy to transportb. High strength, more stable than round hot sticksc. Resolves the rotating problems found in round hot sticksd. Only the number of sections required for the job are extended, giving great flexibilitye. Any section can be replaced if it becomes damaged.

  • High Voltage Double self-test Fiberglass Telescopic acousto-optic ElectroscopeHigh Voltage Detectors with sound and alarm fiberglass electroscope

    High Voltage Double self-test Fiberglass Telescopic acousto-optic Electroscope

    Product Description
    The High voltage electroscope is the necessary security tools for electric system and industrial and mining enterprise electricity work. High Voltage Double self-test Fiberglass Telescopic acousto-optic Electroscope is used for testing 0.1 KV-750 KV lines or equipment whether running with power frequency voltage, ensure the personal safety of lineman

    High Voltage Double self-test Fiberglass Telescopic acousto-optic Electroscope is made of electronic integrated circuit and has stable and reliable performance. It has the characteristics of full circuit self-checking function and strong anti-interference. High voltage electroscope is suitable for 220V-500V, 6KV, 10KV, 35KV, 110KV, 220KV, 500KV, 750LV AC transmission and distribution lines and equipment.

    High Voltage Double self-test Fiberglass Telescopic acousto-optic Electroscope can serve you correctly and reliably in daytime or night, indoor substation or outdoor overhead lines. It is a necessary safety tool for electric power system and industrial and mining enterprises.

    High Voltage Electroscope, integrated the advantages of various traditional electroscope. The lines and advanced and practical features. Field operation with acousto-optic alarm, safe and reliable. Use 4 pcs 1.5V button alkaline battery as power supply, working life is longer. It can detect high voltage line and equipment Whether there is the power frequency voltage. It is used for testing 0.1 KV-750 KV lines or equipment whether running with power frequency voltage, ensure the personal safety.
    We have the complete production equipments and professional production team to manage the whole process from production to packing shipment. All products will 100% test before delivery to ensure the quality.

    High Voltage Double self-test Fiberglass Telescopic acousto-optic Electroscope Working condition: Temperature -20℃— +40℃; relative humidity: 85%
    Power: frequency 50HZ AC circuit.

  • High voltage fiberglass hot stick combined Sectional insulated operating rod/ link sticksHigh Voltage HV brake Pull Rod

    High voltage fiberglass hot stick combined Sectional insulated operating rod/ link sticks

    Brake lever is an insulating tool used to operate live equipment for a short time, such as connecting or disconnecting high voltage disconnecting switch, falling fuse, etc.

    1. Interface type insulation lever is a kind of insulation lever in common use. The section adopts the butt screw interface, the length can be up to 14 meters, and the section can be bagged and carried easily.
    2. This series of XINCHENG brake lever (insulation operating rod, link rod) is made of the first-class epoxy resin pipe with excellent insulation performance and mechanical strength, light weight, and anti-North Korea treatment. It has the characteristics of light weight, high mechanical strength and easy to carry.

    3, the brake lever (insulated operation bar, Link bar) design novel, superior materials, reasonable structure, easy to use.

    (1) The brake lever handshake part adopts silicone rubber sheath and silicone rubber umbrella skirt bonding, insulating performance, safe and reliable.

    (2) The brake rod end all belong to the joint using embedded or outsourced structure is more firm, safe and reliable.

    (3) The brake rod extension and connection is convenient, strong selectivity, various connection forms, can be combined flexibly.

  • High Voltage portable Fiberglass Discharge Stick/RodStatic Discharge Resistive electric discharge rods

    High Voltage portable Fiberglass Discharge Stick/Rod

    The high voltage discharge rod can be used for on-site high voltage test, especially in DC withstand voltage test, it should carry out a ground discharge for the accumulated charge on tested objects to ensure personal safety.

    Portable telescopic rod model is easy to use in the outdoor high voltage test, especially in DC voltage test, to test the charge accumulation, to discharge, to ensure personal safety using the discharge rod discharge, is to ensure that the necessary for each test of the personal safety of the weapon. Portable telescopic rod is easy to carry, convenient, flexible, has the advantages of small volume, light weight, safe and reliable, is a safe tool of high voltage staff lack.

    Non Linear Carbon Discharge Resistor Type Discharge Rods are used to discharge dead system having limited fault levels and also to discharge the static & induced charges in the dead system or equipment, particularly in transmission lines, cables, transformers, reactors, large bus bar systems, switch-gears etc. The earthing lead is made up of special highly flexible braided copper cable with transparent sheath. Copper Hook and copper rod & Earth End Clamp of special alloy are provided.

  • Portable High Voltage Earthing Grounding Wire Earth Clamp / Needle Ground RodPortable High voltage ground rod with earth wire and clamp

    Portable High Voltage Earthing Grounding Wire Earth Clamp / Needle Ground Rod

    High Voltage Grounding Rods with Earth Clamp are matched with earthing wires and earthing pin or earth clamp to form a complete set. Application: Suitable for making power failed equipments or temporary short-circuited lines grounded, preventing unexpected power to intrude in and do damage to personnel and equipments.
    The material operating rod is Super Epoxy Non-alkali Fiberglass Fabric Tube
    Grounding wire is the line that connects the earth directly. High Voltage Grounding Rods with Earth Clamp can also be called safety loop line. When danger occurs, it transfers high voltage directly to the earth, which is a lifeline. Grounding wire in power system: is an important tool to ensure staff when unexpected voltage occurs on the outage equipment and lines. In order to prevent electrostatic induction shock or mis-closing of nearby charged objects, The material operating rod is Super Epoxy Non-alkali Fiberglass Fabric Tube, and the soft ground connection is made of multiple strands of high-quality copper wire.

  • Portable Super light FRP insulated telescopic height measuring rod/stickSuper light insulated telescopic height measuring rod/stick

    Portable Telescopic Insulated Height measuring rod/stick

    Portable Telescopic Insulated Height measuring rod/stick is made of glass fiber cloth, epoxy resin, 306 resin phthalic anhydride, fiberglass fiber cloth and curing agent. After a second high temperature and then first set on the mold, then remove the mold, after a second high temperature grinding, a rough grinding, two fine grinding, and then lacquered into other FRP products, beautiful appearance, lightweight structure, easy to operate, It has excellent mechanical and electrical properties and is suitable for use under various high pressure conditions.Portable Telescopic Insulated Height measuring rod/stick has good insulation performance and is safe to use.Portable Telescopic Insulated Height measuring rod/stick is with the property of light weight, high strength and high insulation.

  • FRP Telescopic fiberglass height measurement rodstickSuper light insulated telescopic height measuring rod/stick

    Portable Telescopic Insulated Height measuringg hot stick Yellow Colour

    Portable Telescopic Insulated Height measuring rod/ hot stick is made of glass fiber cloth, epoxy resin, 306 resin phthalic anhydride, fiberglass fiber cloth and curing agent. After a second high temperature and then first set on the mold, then remove the mold, after a second high temperature grinding, a rough grinding, two fine grinding, and then lacquered into other FRP products, beautiful appearance, lightweight structure, easy to operate, It has excellent mechanical and electrical properties and is suitable for use under various high pressure conditions.Portable Telescopic Insulated Height measuring rod/hot stick has good insulation performance and is safe to use.Portable Telescopic Insulated Height measuring rod/hot stick is with the property of light weight, high strength and high insulation.

  • Rain proof Fiberglass Electrical screw type Operating Rods /hot stickRain proof Fiberglass Electrical screw type Operating Rods /hot stick

    RainProof Fiberglass Electrical screw type Operating Rods /hot stick

    The high-voltage gate rod, also known as the Lingke rod, the insulated rod, and the insulated gate rod, is composed of a working head, an insulating rod and a handle. It is used when closing or opening the high-voltage isolating switch, assembling and disassembling the portable ground wire, as well as when measuring and testing.
    The high-pressure gate rods can be divided into two types according to the combination form, one is the interface type gate rod and the other is the telescopic gate rod. The interface type is relatively durable, and the telescopic type is relatively convenient to operate.
    According to the use environment, it can be divided into two types: one is the ordinary gate rod, and the other is the rainproof gate rod.
    According to the material, it is divided into: glass brake lever, phenolic resin lever, epoxy resin and so on.

  • Fiberglass Telescopic Operating Rod Link StickHigh-voltage pull brake rod, Link rod

    Telescopic Fiberglass Electrical Hot Stick

    The triangular  Telescopic Hot stick  are designed to be used in high voltage isolating switch out operating, being one of the most used safty tools in hot line maintenance. The triangular Telescopic hot sticks are manufactured with epoxy reinforced fiberglass tubes. The triangular Telescopic hot sticks comprises a number of sticks that slide into each other with integrated locking buttons. The triangular Telescopic hot sticks have a lot of advantages over round hot stick. a. Easy to transportb. High strength, more stable than round hot sticksc. Resolves the rotating problems found in round hot sticksd. Only the number of sections required for the job are extended, giving great flexibilitye. Any section can be replaced if it becomes damaged.

  • American box type transformer operating Telescopic shotgun rodAmerican type box type transformer operating Telescopic shotgun type rod for Substation Insulation

    Telescopic shotgun type operating rod for prefabricated substation of American box transformer

    The shot gun stick is suitable for the operation of high voltage electrical equipment ,such as combined transformer(American Type), cable branch box and ring network cabinet.

    Telescopic shotgun type operating rod for prefabricated substation of American box transformer can switch the load switches under the condition of being live, and plug and pull the accessories such as plug-in fuse, elbow-type lightning arrester and elbow-type cable connector. It is an indispensable tool for combined transformer, cable branch box and ring network cabinet.

    Telescopic shotgun type operating rod for prefabricated substation of American box transformer also can be used to operate the line clamps.

  • 20 FT Light Weight Fiberglass Insulated Telescopic Trucks Load Cargo Height Measuring StickTelescoping Fiberglass Measuring Height Stick for Truck Cargo

    Telescoping Fiberglass Measuring Height Stick for Truck Cargo

    The high-voltage height measuring rod is made of epoxy resin, which has greatly enhanced bending resistance, fine process, light structure, convenient operation, accurate positioning, clear surface scale, excellent mechanical and electrical properties, light weight, high strength, good pressure resistance, accurate calibration and other advantages. The high-voltage height measuring rod is suitable for height measuring places under various high-pressure working conditions, and its measurement error is not more than 1cm.

    Fiberglass height measuring stick helps drivers avoid underpass damage by allowing safe and accurate load height measurement. The common applications include wide load escorts; heavy equipment haulers; trucking companies; and fire, law enforcement and rescue personnel. The high-voltage height measuring rod has good insulation, and can provide different scales (metric and imperial) according to customer needs, high-quality measuring rods in different colors, Truck measuring stick/rod  has clear and accurate scales, light weight, high strength, good pressure resistance, easy to carry, strong and durable advantages.