Filament winding epoxy fiberglass polymer tube for Drop-out fuse cutout (Arc extinguishing vulcanizing)

Filament winding epoxy fiberglass polymer tube:The main application of fiberglass tube is used in expulsion fuse tube cutout for interrupting high voltage AC circuits during power surge.

In addition, glass filament wound tubes are also widely used in the main insulation products of high-voltage test devices such as oil immersed transformers, H-class dry-type transformers, railway locomotive transformers, on load tap changers, reactors, lightning arresters, SF6 transformers, etc.

Categoria: Tag: , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Overview:

Place of Origin: China                                                         Brand Name: XINCHENG

Application: Dropout fuse casing, Drop-out door fuse tube, current limiting fuse cutout ,Insulation tube, casing, bushing

Surface Treatment: Coating ,Painting, Machining ,UV resistant smooth paint

Technique: Filament Winding, cutting ,grinding, painting, Filament Winding Process, Cutting Process

Material: Epoxy Fiberglass, Arc extinguishing vulcanizing tube       Shape: Hollow

Fiber content (weight ratio): 70%~75%;

Color: Grey, yellow, orange, brown, green, blue, etc.                     Feature: Light Weight, High strength, Insulation

Tensile Strength: Axial 280 MPa; Circumferential 600 MPa           Arc Resistance: 150-180 sec

Winding angle: 50-90 degree. (the winding angle can be adjusted according to different requirements to achieve better mechanical properties);

Thermal stability: ≥180℃(H class)                          Standard: IEC, GB, etc.

inner diameter:> 5mm; Outer diameter: < 300mm; Length: < 2000mm.

Insulation strength: axial 3 ~ 6kv/mm; Radial 10 ~ 12kv/mm;     Water absorption: less than 0.03%;

Axial thermal expansion coefficient, 1.8E-05 1/K;

Chemical resistance mineral oil: excellent;                        Solvent and dilute acid: excellent;

Certificate: ISO9001,ISO14001,OHSAS                            Dielectric Constant: 4.7

Insulation Resistance: 10 meg ohms                                 Sample: Sample Available

Filament winding epoxy fiberglass polymer tube for Drop-out fuse cutout
Filament winding epoxy fiberglass polymer tube
for Drop-out fuse cutout

Fiber glass fuse tube for fuse cutout:

Fiber glass fuse tube for fuse cutout:

The fuse cutout is connected with the incoming feeder of the distribution transformer or distribution line. These are mainly used to protect transformers or lines from short circuits and overloads and switching currents. The drop out fuse unit is composed of insulator supports and a fuse tube. The fuse tube we produce is composed of epoxy glass fiber pipe outside and arc-extinguishing vulcanized pipe inside.

Aplicativo:

The main application of fiberglass tube is used in expulsion fuse tube cutout for interrupting high voltage AC circuits during power surge.

In addition, glass filament wound tubes are also widely used in the main insulation products of high-voltage test devices such as oil immersed transformers, H-class dry-type transformers, railway locomotive transformers, on load tap changers, reactors, lightning arresters, SF6 transformers, etc.

It is mainly used for structural parts of high-voltage electrical equipment such as lightning arresters (bushings), current limiting fuse boxes, connecting rods, grounding rods, etc., such as reactors, lightning arresters, fuses, transformers, on load tap changers, transformers, and some high-voltage electrical and gas equipment that require good insulation resistance and arc resistance. The product performance parameters meet the requirements of IEC standards, and the product is in a leading position in China.

 

Fiber glass fuse tube for fuse cutout Material:

Inner: Arc extinguishing vulcanizing tube

Outer: fiberglass reinforced epoxy resin winding tubes

Surface: UV resistant insulation painting

Arc extinguishing vulcanizing tube was wrapped by fiber glass impregnate epoxy resin ,The angle of wind is optimized to provide a finished tube with good tensile and anti explosion strength.

Arc extinguishing vulcanizing tube becomes an integral tube liner which have the property of gas-generating and arc-quenching characteristics.

Process:

  1. Arc extinguishing vulcanizing tube is used to make fuse tube for dropout cutout.
  2. Arc extinguishing vulcanizing tube was wrapped by fiber glass impregnate epoxy resin, the angle of wind is optimized to provide a finished tube with good tension and anti explosion strength.
  3. Arc extinguishing vulcanizing tube becomes an integral tube liner which have the property of gas-generating and arc-quenching characteristics.
  4. Epoxy resin fiberglass tube property of strength and water resistance.
  5. The fiberglass tube is usually coated with UV resistant in gray color
Filament winding epoxy fiberglass polymer tube for Drop-out fuse cutout
Filament winding epoxy fiberglass polymer tube
for Drop-out fuse cutout

Filament winding epoxy fiberglass polymer tube for Drop-out fuse cutout
Filament winding epoxy fiberglass polymer tube
for Drop-out fuse cutout

Glass Fiber Winding Pipe Advantage:

No-spark generating, char layer forming it prevent liner from excessive ablation, and the optimum amount of arc-quenching gas generating.

High mechanical strength yet light weight: helps save on transportation and easy to install

Dimensionally stable: low deformation rate, won’t shrink ,swell

Fire-retardant and nonconductive: helps create a safer environment

Corrosion resistant: extends service life

Low hydroscopicity: can work in humid environment

Low thermal insulation coefficient: can be used at high temperatures

Can be immersed in oil: for better insulation

Epoxy Fiberglass Tubes Feature:

Epoxy Fiberglass Tubes Feature:

  1. High temperature
  2. Fire Resistance: UL94 V-0
  3. Good flatness, smooth surface, no pits, standard thickness tolerances
  4. Low water absorption, has good moisture resistance and good dielectric properties
  5. Stable electrical insulating properties, good electrical performance in dry or wet conditions
  6. High mechanical strength, good processability, Can be processed repeatedly, Punching, Drilling, Machining and Cutting is available
  7. Complete specifications, sufficient stock to meet the different needs of customers, map processing is also accepted

Technical data:

 

Technical data:

NO. ITEM UNIT VALUE
1 Density g/m³ ≥2.0
2 Winding angle ° 45°-75°
3 fiber content(weight ratio) % 70%-75%
4 water absorption % ≤0.03%
5 chemical resistant mineral oil Excellent
6 solvent and dilute acid Excellent
7 tensile elastic modulus M pa ≥1400
8 tensile strength M pa Axial:≥280   circumferential:≥600
9 shear strength M pa ≥150
10 flexural strength M pa Axial:≥350
11 compressive strength M pa Axial:≥240
12 surface insulation resistance Ω ≥1.0*10ᴧ12
13 the dielectric loss factor % 0.003-0.015
14 partial discharge capacity(under 84kv) PC ≤5
15 insulation strength kV/mm Axial 3-6kv/mm, Radial 10-12kv/mm
16 lightning impules Kv 110
17 power frequency impact(5 minutes) Kv 100
18 heat resistance grade B, F, H grade
19 inner diameter mm ≥5
20 outer diameter mm ≤500
21 length mm ≤3000
The above data is only for reference,

The casing parameters we produced are customized for each customer’s request.

The epoxy glass fiber winding pipe is made of non-stop fiber wet winding, we can adjust the winding angle according to your requirements to meet your mechanical performance requirements.

Note: The above data is only for reference. The casing parameters we produce are customized for each customer’s needs!

 

Epoxy Fiberglass Tube:

  1. Epoxy tube is an insulating product formed by alkali-free glass fiber and binded with epoxy resin, with baking and curing, cutting, Drilling Process.
  2. With high mechanical property and stable electrical property, as well as high temperature resistance and corrosion resistance. suitable for being used as insulation structural parts of mechanical, electrical and electronic equipment. the product performance parameters meet the requirements of IEC standards.
  3. It can be processed according to different requirements (grooving, turning, picking, etc.) We can produce any shape fiber glass insulation pipe according to customer’s requirement.

 

Nossas vantagens:

1、Our great passion and rational attitude make us highly efficient.

2、We have more than 10 years experience in the processing of epoxy glass fiber winding composite pipe.

3、We are factory with large warehouse.

4、We have advanced automated CNC equipment and professional engineers.

5、We have a strict supervision system, each batch of goods must pass strict inspection before leaving the factory.

6、We own several whole production lines, which can not only provide best quality and competitive price, but also reduce production period.

7、We can support OEM , and can be customized according to the detailed requirement, Like samples or sketches.

Filament winding epoxy fiberglass polymer tube for Drop-out fuse cutout
Filament winding epoxy fiberglass polymer tube
for Drop-out fuse cutout

Packaging & Delivery:

Packaging Details : carton box packaged in plywood pallet or wooden case outside, or by customer’s requirement

Port: Tianjin, Qingdao or Shanghai port

Time de entrega: 7-15 dias

Please Contact Us:

 Miss: Lydia

https://fiberglasshotstick.com

[email protected] 

WeChat : 86-13752439076   WhatsApp: 86-13752439076

Mob: 86-13752439076       Fax: 86-22-60863016     

http://www.frpinsulation.com