Asta di manovra tipo fucile telescopico per cabina prefabbricata di trasformatore scatolato americano
The shot gun stick is suitable for the operation of high voltage electrical equipment ,such as combined transformer(American Type)， cable branch box and ring network cabinet.
Telescopic shotgun type operating rod for prefabricated substation of American box transformer can switch the load switches under the condition of being live, and plug and pull the accessories such as plug-in fuse, elbow-type lightning arrester and elbow-type cable connector. It is an indispensable tool for combined transformer, cable branch box and ring network cabinet.
Telescopic shotgun type operating rod for prefabricated substation of American box transformer also can be used to operate the line clamps.
Inquiry
Product Description:
The insulated operating rod of American box type transformer is applicable to the operation of high-voltage electrical equipment such as combined transformer (American box type transformer), cable branch box and ring network cabinet. It can switch the load switch under the charged state and plug in and out the accessories such as plug-in fuse, elbow lightning arrester and elbow cable connector. It is an indispensable tool for cable branch box and ring network cabinet of combined transformer. The insulating operating rod of American box transformer is specially used for live pulling and inserting 200A elbow cable plug, lightning arrester, 200A protective cap and special insulating tool for operating high-voltage load switch of American box transformer
The shot gun stick is suitable for the operation of high voltage electrical equipment ,such as combined transformer(American Type)， cable branch box and ring network cabinet.
Application:
American box type transformer operating Telescopic shotgun rod are the most versatile tool in a line worker’s hands, the stick puts an easy-to-control “finger” on an insulated pole. Although primarily designed for installing hotline and grounding clamps,American box type transformer operating Telescopic shotgun rod serves both overhead and underground circuts with various end fittings. Commonly called a “shotgun”, the operating mechanism incorporates a sliding hand grip that opens the hook to grasp a clamp eyescrew and retract it into the tool head. A thumb latch then must be depressed to release the locked hand grip so it can open the hook.
Operation:
The gun type operating rod is composed of a threaded tool holder sliding handle to open the shackle;
When opening: the latch must be pressed, release the handle and open the shackle;
Stable operation, stainless steel investment casting;
The assembly includes a metal jaw, a safety stop position and a latch;
Operators must keep the recommended safe working distance;
The gun type operating rod is easy to care and does not need to be disassembled and cleaned on site;
All insulated parts, including operating rods and parts close to live parts, can be easily wiped dry.
Specifications:
Specifications:
| Model | Length | Voltage | Net Weight |
| XC-GS-1 | 1.4m | 10KV | 2.0kgs |
| XC-GS-2 | 2.0m | 35KV | 2.4kgs |
| XC-GS-3 | 2.5m | 110KV | 2.9kgs |
We can also customize as per your requirements.
Use safety tips:
- The operation of The insulated operating rod of American box type transformer must be carried out by professional high-voltage technicians.
- Before use, check whether the operating lever is intact, clean and dry.
- During live operation, workers must wear insulating gloves, insulating caps and insulating boots and strictly implement the insulation requirements
If any problem occurs during operation, the power supply should be cut off immediately.
Note: American box type transformer operating Telescopic shotgun rod must be cleaned and dried after operation, and then put back into the packaging bag. The electrical performance test of the operating lever should be conducted every 6 months.
The storage environment shall be dry, clean and free from direct sunlight.
